Quarry Tiles & Flagstone Cleaning

dsc_0140

Flagstone Clean & Sealing – The Advantex Way

A flagstone is a sedimentary rock that is split into layers along well defined bedding planes caused by a different mineral type or particle sizes. A flagstone is usually produced from a form of sandstone composed of feldspar and quartz. The material that binds flagstone is usually composed of silica, calcite, or iron oxide. The rock colour usually comes from these cementing materials. Typical flagstone colours are red, blue, and buff, though some other colours do exist.

image4-2

Quarry Tile Cleaning – The Advantex Way

1 - Room Preparation - Due to health & safety and insurance restrictions, we respectfully ask you to move all furniture and breakable items. Our craftsmen will then carefully protect skirting boards and wall coverings, using low tack tape, waterproof plastic or waxed paper.
2 - Dry Mop - Dry mopping of all areas to be treated collating all dry soil.
3 - Vacuum floor - Power vacuum using HEPA filtration vacuum cleaners ensuring the removal of loose dirt, sand and dust. Making sure all the edges are dust free using edge nozzles.
4 - Deep Cleaning / Stripper - Application of our unique stone stripping solution which will break down and
remove old seal/polish buildups. Then using various grades of brushes/pads and agitation machinery we clean
deep down in to the stone/grouting. Followed by, pressurized water extraction using enclosed spinning heads, providing unrivaled results.
5 - Stone Neutralization - Application of our Natural Stone Rinse, this will neutralize the floor ready for
further treatments.
6 - Conditioning The Stone - Using a unique blend of natural vegetable oils, Natural Stone Conditioner will reinstate the stones natural oils and enhance its colours prior to polishing.
7 - Drying - We Install air movers to assist in drying your natural stone and grouting.
8 -Impregnation/Sealing - Hand application of our reactive Ceramic & Porcelain Impregnator, which has
been specially designed to protect low porosity tiles. This process is vital it can take a number of hours as the
tiles have to be completely dry prior to application. In addition, the floor has to be dry when applying the recommended additional coats of impregnator. This will protect your ceramic / porcelain tiles in the future, guarding against both oil and water based spills. And of course, your daily maintenance of the floor will be greatly improved due to the protective barrier.
9 - Benefits - As every stone surface is different and hard floor / walls can be high maintenance, having the stone impregnated from day one will protect your investment. Nu-life will continue to assist you with your floor maintenance, we will advise yourselves of the correct products to use.