Marble floor cleaning and polishing in Bath


We were asked to examine a  floor in a Kitchen in Bath. This was a marble floor that needed cleaning and polishing.  The prospective Client had become despondent with it. Despite numerous attempts to clean the Marble floor and buff it, the results were lacklustre. We offered the Client a 3 step solution to the problem. The Client was overjoyed with the results.

The problem

Composite Marble floor before starting
Composite Marble floor before starting

The problem associated with the floor was the use of “improper chemical cleaners”, products that were caustic and had etched the surface, instead of maintaining the lovely polish it had started with. The second was the use of a steam mop, that had degraded and broken down the impregnating seal.

The Solution

Composite Marble Floor applying the impregnating seal
Composite Marble Floor applying the impregnating seal

Firstly, the floor was swept with a microfiber mop to remove all debris. The units and skirtings were masked and overlaid with tape and masking films to protect them.

Next the floor was cleaned with a mild alkali solution, in order to clean the grout lines and the tiles. The floor was allowed to dry.

Two days later we returned to apply a colour enhancing impregnator. This was applied to the floor and allowed to sink into the stone. This was then allowed to “cure” for 3 days.

We then returned and set about polishing the floor from its dull scratched finish to the super smooth mirror-finish gloss that the Client requested. This is carried out with a series of diamond impregnated pads, which are run over the floor with a rotary machine and water. The grades used went from 400, 800, 1500. 3,000, 10,000 and 11,000 final stage with a polishing powder.


Composite Marble floor after final polishing
Composite Marble floor after final polishing

The final result amazed the Client totally. He had been contemplating taking the floor up completely as he didn’t believe it was possible to replicate the factory-finish that the stone once had. In fact, he suggested the stone floor had never looked like that in the first place.

The impregnating seal applied, should now help anything staining the floor and causing etching onto the surface. A maintenance plan and correct methodology has now been put in place, the correct neutral ph cleaner and high grade microfiber mopping system has been employed.

Now the floor should last in it’s present state.

Cleaning and Sealing Flagstone Floors

Cleaning  and Sealing Flagstone Floors

If you have or have inherited a flagstone floor you will know how difficult it is to maintain. The large sizes of uneven slabs tend to have crevices and areas where soil can gather. Once built up  soil can be almost impossible to  remove.  Cleaning and sealing flagstone floors  with domestic chemical DIY products and equipment is very difficult to attain the right finish

If the surface has or had been sealed, you will experience areas that strong agents, such as caustic cleaning chemicals such as bleach as well as strong agents like vinegar have made an impact on the surface.

Even good old steam unfortunately has a detrimental effect on the life of the seal. These are, as well as wear over the years the reason why your stone surface suddenly seems to be looking poor. Cleaning and sealing flagstone floors is a lengthy process

We always aim to not only return the stone to as near a perfect condition as possible, bearing in mind the age, but to also leave the client with a surface they can confidently maintain with the right products and equipment and they are sure of the methods used.

This Flagstone Floor in Martock

The flagstone floor in these pictures have been uncovered in a cottage in Martock. They had been covered in both bitumen and years and years of soil. We set aside to firstly clean the surface, using an eco-safe solution  sprayed onto and allowed to dwell and then scrubbed into the floor with a rotary machine and a  silicon carbide brush carousel.

Cleaning Flagstone Floors
Flagstone Floor before cleaning

Then the solution was removed via an extraction machine attached to a hard floor wand. The floor was then neutralised and allowed to dry for 3 days.We then returned and carried out a few touch ups, checked the moisture content, before proceeding to apply two coats of impregnator to the floor.

Sealing a flagstone floor
Applied impregnator seal to a flagstone floor

The Impregnator was allowed to dry and we returned the next day to topically seal the floor with four coats of satin seal, which was the clients preferred finish.

Topical seal applied to the Flagstone Floor
Topical seal applied to the surface of Flagstone Floor

The room was allowed to finally dry and cure, before the new Kitchen installation was carried out. Client was happy with the transformation. If you would like to enquire what we could do for your floor, contact us on 01173250087 or

Karndean Cleaning Bristol


Karndean Cleaning Sealing and Maintaining

Many people  enjoy the luxury of a beautiful Karndean Floor. Whilst the maintenance kit supplied alows them the ability to clean and then seal the floor, over time they may lose the time to carry this out consistently, have longer time intervals between cleans  and so the floor begins to soil. This can lead to poor appearance and the onset of wear or heavier soiling.This is where Karndean Cleaning Bristol has carried out a clean and seal for a client.


Karndean Cleaning in Bristol
Karndean Floor before cleaning

Asked by a Client to carry out Karndean Cleaning in Bristol and to return the floor to its original glory. The floor is a wood grain-effect Karndean and the grain structure had become heavily soiled, as the seal had worn it has become a trap for soils. The floor was dry microfibre moppped and then a pre-spray applied and allowed to dwell for 10 minutes. This allowed the soils to become separated from the surface and held in suspension, making it easier to remove from the flooring.

As the product is a Nano-technology product, the level of soil removal is much greater and much safer, as it is also environmentally friendly.

Now the soil is agitated, via either a rotary machine,or an orbital pad machine. This dislodges the soil and allows it to be ready for capture during the next process.

Karndean Cleaning in Bristol
Karndean Floor during cleaning

The soil is now extracted away via an extraction machine and the floor is once again microfibre mopped to aid drying. The floor was then dried thoroughly with an air mover pointed at different areas of the room.

Karndean cleaning in Bristol
Karndean Floor partially cleaned

Once dry, the floor is resealed with two coats of seal, carried out in various directions, to ensure the floor was evenly covered and the grain structure was sealed to prevent re-soiling.

Karndean Cleaning in Bristol
Karndean Floor cleaned and sealed

The end result was a happy client who has a restored floor and has been given the right maintenance product to ensure they do not remove the seal applied and make it easier to maintain.

A satisfactory end to Karndean cleaning in Bristol

Limestone Floor Cleaning in Bristol

Work Description

We were asked to survey and quote on Limestone Floor Cleaning in Bristol for a Client. The premises had been taken back to bare walls for restoration and the floor needed to be cleaned and resealed with an impregnating seal,  prior to Kitchen Installation.

Limestone Floor Cleaning in Bristol
Limestone Floor Prior to cleaning

The floor was swept, heavily vacuumed and the dry microfibre mopped to remove any surface debris and soiling. Next a pre-spray was applied to the Limestone Floor of a cleaning solution and water and allowed to dwell. This allows the soil to be removed in higher quantities and easier as the soil has lost it’s bond to the Limestone Floor. This we carry out when Limestone Floor Cleaning in Bristol, to give a cleaner end floor.

Limestone Floor Cleaning in Bristol
Soiled Limestone Floor Corridor

Once the cleaning solution has time to work, it is then agitated with a Rotary Machine with a medium stiff brush to get in amongst the tumbled surface. The soil and cleaning solution is then extracted away via an extraction machine and a hard floor wand and rinsed with water.

Limestone Floor in Bristol Partially Cleaned
Limestone Floor in Bristol Partially Cleaned

This process is continued until all the floor has been cleaned and is free from soil. The floor is then left for 48 hours to completely dry out from moisture and we then returned and applied two coats of a solvent based impregnator, to seal the floor from accepting staining into the Limestone.

Limestone Floor after cleaning in the Kitchen area
Limestone Floor after cleaning in the Kitchen area


The Client was then left a maintenance cleaning product, to help maintain the floor without using harsh chemicals that may remove the impregnating seal. The right maintaining cleaner will do this and not leave harsh residues that attract soiling to return faster.

Limestone Floor Corridor Cleaned and Sealed
Limestone Floor Corridor Cleaned and Sealed

Vinyl Safety Floor Cleaning in Bristol

Vinyl Safety Floor Cleaning in Bristol

The job requested

We were called by a cleaning company to see if we could assist in safety floor cleaning in Bristol. The floor in the ground floor office, entrance and storage area had become deeply ingrained into the grain structure and was in need of a thorough clean.

The owners had spent several hours themselves, but to no avail as all they had removed was the surface soiling. The products they were using were also caustic and there was a fear for the surface of the floor.

We were asked if we thought we could make an impact on the floor as they didnt think it possible to get thoroughly clean

vinyl safety floor cleaning - Test Patch of Vinyl Safety Floor showing soil removed
vinyl safety floor cleaning – Test Patch of Vinyl Safety Floor showing soil removed

Moving forward

From the test patch the owners were impressed and booked us to carry out the work.

Vinyl safety floor cleaning - before cleaning
Vinyl safety floor cleaning – before cleaning

Carrying out the work

On arrival, we immediately removed all loose items of the floor, swept and microfibre dry mopped it to remove all debris and particulate from the areas.

Next, we made up a pre-spray of Oleonix Full Spectrum Cleaner at 20:1 and pre-sprayed an area of approx 3 metres square. We left the spray to “loosen the soil” for a good 10 minutes whilst we prepared the equipment.

To agitate the spray and carry out soil removal whilst vinyl safety floor cleaning, we used a combination of a Rotowash machine and a 17″ Rotary fitted with a green pad. We began then in sections to agitate and remove the soiling, from deep within the grain structure.

vinyl safety floor cleaning - Removing soil with a Rotowash machine
vinyl safety floor cleaning – Removing soil with a Rotowash machine

We continued the process throughout the floor, using the rotary machine on the larger areas where there was more room.

vinyl safety floor cleaning - Removing soil with a rotary machine
vinyl safety floor cleaning – Removing soil with a rotary machine

When vinyl safety floor cleaning, areas were cleaned back and then thoroughly rinsed with water. The biggest advantage of these methods are:

  • Eco-safe products minimise water used
  • The cleaning product cut down time with it’s efficiency
  • The products work to Nano levels, meaning soils are taken away to a much smaller level and to a greater depth.
  • Due to cleaning efficiency more soil is removed, making it longer to eventually re-soil
  • No strong odour or smell
  • No effect on the flooring as no caustics, detergents, phosphates were used.


The Owners were extremely pleased with the results from our vinyl safety floor cleaning and have booked us in to carry out annual cleans to keep the floor looking good.

Vinyl safety floor cleaning - final result of cleaning
Vinyl safety floor cleaning – final result of cleaning



Slate Floor Cleaning in Bristol

Slate Floor Cleaning in Bristol

We recently completed slate floor cleaning in Bristol. The clients had found the floor difficult to maintain and with two children and two dogs on the edge of the country meant it needed to be cleaned and well sealed to help with the maintenance. The grout lines were particularly bad and were heavily soiled.

We firstly applied protective film to all the upright surfaces around the area to protect from any splashes. Next we set about pre-spraying the area to be cleaned with an eco-safe cleaning product, that is not harmful to surfaces, pets and children. The pre-spray is allowed to dwell, then is scrubbed with a rotary machine and brush attachment to help  loosen the soil. The grout lines are cleaned to depth with the aid of a grout brush

Slate Floor Cleaning In Bristol where the floor has been pre-sprayed
Applying the pre-spray to the slate floor

The loosened soil is then rinsed away with water via an extraction machine and hard floor wand. The floor is checked for uniformity and any areas are touched over. Then air movers are placed onto the floor and the floor dried in sections to aid drying time

Slate Floor Cleaning in Bristol which has been cleaned and is now drying
The floor is then blown dry

We then allowed the floor to thoroughly dry over two days to ensure there is nor remaining moisture before we return to reseal it.

Slate Floor Cleaning in Bristol which has been sealed
The floor has been sealed with colour enhancer and four layers of seal

To bring out the range of colours on the floor, the floor is sealed with a colour enhancer and  four layers of seal. The colour enhancer is a much thicker product that deepens the colour of the stone to make it more attractive. This is carried out at hourly intervals with a seal applicator and then time is given to allow each coat of the seal to dry.

Once completed, we ensure the client has the right cleaning product to upkeep the floor.

Limestone Floor Cleaning in Somerset

Limestone Floor Cleaning in Somerset

We have recently completed  Limestone Floor Cleaning in Somerset. The floor was heavily soiled and the owners were struggling to keep up with maintaining the floor.
We carried out a survey and a demonstration test patch which showed the impregnator previously applied had broken down. The owners were so impressed with the test area, we were given the task of restoring the floor to its former glory.

Test patch for Limestone Floor Cleaning
Test patch cleaned on a Limestone Floor

We first protected all the upright surfaces with a protective film and wax paper which has taped into place. We then set about brushing and dry microfibre mopping the floor to remove any loose soil and debris.

Next, we applied a pre-spray of Oleonix Full Spectrum Cleaner and allowed the product dwell time to break down and suspend the soil.  This is an eco-safe product that is safe to use across all stone surfaces especially when Limestone Floor Cleaning, whilst gently lifting away soil. Once it had time to dwell, we then lightly scrubbed into the surface to loosen the soil using a rotary machine and a medium stiffness brush attachment.

Limestone Floor Cleaning, Scrubbing the loosened soil
Scrubbing the loosened soil on a Limestone Floor

We then rinsed the floor and removed all soil and chemical using a hard floor wand attached to an extraction machine. This then leaves a clean and neutralised surface.  The floor was then “blown dry” using air movers and allowed to thoroughly dry naturally. This is very important when cleaning porus stone and carrying out Limestone Floor Cleaning

Limestone Floor Cleaning, air drying the floor
Air Mover drying a Limestone Floor

Two days later we returned to impregnate the floor with an impregnator seal to reduce the chances of soiling and staining. We also supplied  a maintenance cleaning product and microfibre flat mopping system and instructed the client how to use it effectively.

Limestone Floor Cleaning, applying the Impregnator
Applying Impregnator to a Limestone Floor

The floor is now easy to maintain and with the right products the impregnator is not affected by the eco-safe product supplied.

Besides Limestone Floor Cleaning, we carry out cleaning and restoration of a number of natural and man-made floors

Slate Floor Cleaning in Cheddar

Slate Floor Cleaning in Cheddar

A Kitchen and Dining area Slate floor restored to its former glory.

The Slate floor in Cheddar, was heavily soiled from lack of maintenance. Over a time period of 15 plus years and the new owners of the premises commissioned us to clean and reseal the floor.

They had attempted but could not clean thoroughly or deeply to remove the soil and seal from the floor. The floor was firstly sprayed in a coating of  Oleonix Full Spectrum Cleaner which is an eco-safe product and allowed to dwell for 30 minutes. This allows the product time to break through the soils and seal for easier removal. It was then scrubbed with a rotary machine and medium stiffness brush and the soil broken down and easily removed. The floor was then rinsed with water to remove the suspended soiling and then allowed to dry.

Finally once dry, four coats of a topical seal were applied at set intervals over a day, to help make the floor easier to maintain and repel soil levels

Slate Before Cleaning
Slate Floor in Cheddar before Cleaning
Slate Floor Being Cleaned
Slate Floor in Cheddar During Cleaning process
Slate floor cleaned and sealed
Slate Floor in Cheddar after Cleaning and Sealing Operations

Latest Slate Floor Clean & Reseal in Bristol

Slate Floor Cleaning



The pictures above show the latest clean & re-seal carried out on a Slate Floor in Bristol. The floor had gradually lost a lot of the  topical seal off of the tiled surface and the grout lines had become ingrained over time with mopping soil and debris into them.

We set out first to clean the grout lines and restore the original colour. This is done by applying a strong alkali cleaner and allowing to dwell to loosen the soil, then agitating with a grout line brush and rinsing with water. Next we can address the slate tiles. The surface was stripped of the existing seal by the use of an eco-safe stripping agent sprayed and allowed to loosen the seal.

Then the surface is scrubbed to remove all traces of soil and seal with a rotary machine and scrubbing brush. The surface is then rinsed with water and extracted back with an extraction machine.

The surface is allowed to thoroughly dry before resealing to allow a good bond between the seal and the surface.

Then once dry, the surface can be re-sealed. This is done by us, best by hand, so all the riven surface can be coated but coated in all crevices etc. To build the level of shine requested by the client, five coats were applied to the surface with suitable drying times between each coat.

The surface is then checked and the client is requested not to walk on the area for a length of time to prevent the seals from being affected whilst they cure.

The final events are to show the client the end result and to then talk them through the ways to maintain the finish with the correct products and suitable cleaning schedules.

We recommend ph neutral cleaning products to carry this out, so as to safer for the indoor environment and to not remove any  or damage  the seal from the surface